DM Lite 4K60 4:4:4 Transmitter for USB-C DisplayPort Signal Extension over CATx Cable

Model: HD-TX-4KZ-111

Part #: 6511805

Interoperability with a DM Lite® receiver or DMPS Lite™ switcher
USB-C® input with DisplayPort™ Alt Mode capability for the point-to-point extension of a DisplayPort AV signal over a CAT5e or higher cable
DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
4K60 4:4:4 capability
HDR10, HDR10+, and Dolby Vision® video formats

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The HD-TX-4KZ-111 is a DM Lite® 4K60 4:4:4 transmitter designed to interoperate with a DM Lite® receiver or DMPS Lite™ switcher. The HD-TX-4KZ-111 includes a USB-C® input with DisplayPort™ Alt Mode capability, enabling the transmission of a DisplayPort AV signal. A CAT5e or higher twisted pair cable is used to connect the HD-TX-4KZ-111 to the DM Lite receiver or DMPS Lite switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.

Interoperability with a DM Lite Receiver or DMPS Lite Switcher

The DM Lite output port of the HD-TX-4KZ-111 must be connected to a DM Lite input port of a DM Lite receiver or DMPS Lite switcher. Examples of supported DM Lite 4K60 4:4:4 receivers are the HD-RX-4KZ-101, HD-RXA-4KZ-101, HD-RXC-4KZ-101, and HD-RXCA-4KZ-101. Supported DM Lite 4K60 4:2:0 receivers are the HD-RX-101-C-E, HD-RXC-101-C-E, HD-RX-201-C-E, HD-RX-101-C-1G-E, and HD-RXC-101-C-1G-E. Supported DMPS Lite switchers are the HD-PS622, HD-PS621, HD-PS402, HD-PS401, and HD-RX-4K-210-C-E(-POE).

The HD-TX-4KZ-111 can be configured and controlled only when it is used with a DMPS Lite switcher. The web interface of the switcher can be used to configure the HD-TX-4KZ-111. In addition, control system programming and .AV Framework™ software support of the HD-TX-4KZ-111 is hosted by the switcher.

4K60 4:4:4 and HDR Support

The HD-TX-4KZ-111 supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.

Compact, Surface-Mountable Design

Compact in design, the HD-TX-4KZ-111 can be mounted onto a flat surface such as the underside of a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD-TX-4KZ-111 can receive power from the included power pack or from the remote DM Lite receiver or DMPS Lite switcher.

Interoperability with a DM Lite® receiver or DMPS Lite™ switcher
USB-C® input with DisplayPort™ Alt Mode capability for the point-to-point extension of a DisplayPort AV signal over a CAT5e or higher cable
DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
4K60 4:4:4 capability
HDR10, HDR10+, and Dolby Vision® video formats
Compliance with HDCP 2.3
CEC (Consumer Electronics Control) pass-through capability
EDID pass-through capability
Compact, surface-mountable design
Power from 24VDC power pack (included) or from remote DM Lite receiver or DMPS Lite switcher

Receiver/Transmitter Format Type - USB
Supported Resolution - 1080i (1920x1080)
Supported Resolution - 1080p (1920x1080)
Supported Resolution - WQXGA (2560x1600)
Supported Resolution - Other
Warranty - Yes
Spec Sheet available - Yes

DC Voltage: 24 Volts
Certifications: CE, IC, FCC
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Current Draw: 2.50 Amps
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts
Transmission Range: 230 ft
Depth: 1.08 in
Height: 4.13 in
Width: 4.18 in
Product Weight: 0.75 lbs
Video:
•Output Signal Type: DM Lite® with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support
•Input Signal Type: DisplayPort™ over USB-C® (DisplayPort Alt Mode) with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support
•Copy Protection: HDCP 2.3
Audio:
•Output Signal Type: DM Lite
•Input Signal Type: DisplayPort over USB-C (DisplayPort Alt Mode)
•Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
COMMUNICATIONS:
•USB-C: HDCP 2.3, EDID, CEC pass-through
•DM Lite: HDCP 2.3, EDID pass-through
Connectors:
•USB IN: (1) USB Type-C® connector, female; Digital video/audio input using DisplayPort Alt Mode
•DM LITE OUT: (1) 8-pin RJ-45 yellow connector, female, shielded; DM Lite input port for connection to the DM Lite output port of a DM Lite transmitter or DMPS Lite™ switcher
•24V 1.25A: (1) 2.1 x 5.5 mm DC power connector; 24VDC power input; PW-2420RU power pack included
Controls and Indicators:
•LINK: (1) Green LED, indicates that a DM Lite link is established
•PWR: (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational
•USB IN: (1) Green LED, indicates that the device is transmitting an HDMI signal
•DM LITE OUT: (2) LEDs on RJ 45 connector. Green indicates that a DM Lite link is established, Flashing amber indicates non-HDCP video, and solid amber indicates HDCP video
Humidity: 20% to 90% RH (non-condensing)
Enclosure:
•Chassis: Metal, black finish, vented sides, 2 mounting brackets included
•Mounting: Freestanding, surface mountable, or attachment to a single rack rail

Transmitter 2090358 kb - Data Sheet

Project List