Audio Production Equipment : Amplifiers (Audio) : Crestron Electronics, Inc. - AMP-2210T

2x210W Commercial Power Amplifier, 4/8 ohm or 70/100V

Model: AMP-2210T

Part #: 6504846

Ultra-efficient amplifier design
High-output, low noise, low distortion performance
Transformer isolated 70 and 100 Volt outputs
Individual channel power control via jumper or remote contact
Auto power-down after 30 minutes of no signal

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

2x210W commercial power amplifier, 4/8 ohms, 70/100V for all types of professional audio applications. 100% Crestron engineered and built, these amplifiers are designed to meet ENERGY STAR certification to help organizations fulfill their green initiatives without compromising on audio performance. Featuring a high-efficiency amp topology and active power factor corrected power supply, plus additional power-saving features and configurable outputs on every channel, these amplifiers offer a very cost-effective and space-saving solution for boardrooms, auditoriums, and other demanding commercial applications.

Ultra-efficient amplifier design
High-output, low noise, low distortion performance
Transformer isolated 70 and 100 Volt outputs
Individual channel power control via jumper or remote contact
Auto power-down after 30 minutes of no signal
Instant auto power-on when a signal is detected
No inrush current during power-up
Over current and DC offset protection per output
Thermal protection on the power supply and each channel
Front panel signal, clip, and fault indicators per channel
Professional balanced inputs
Detachable terminal block connectors
Rear panel 10dB input level controls
Convection cooled - no noisy fans
Single-space 1U rack mountable
Under 15 inches deep
Universal power supply with active power factor correction

Amplifier Signal Type - Audio
Amplifier Type - Power Amplifier
Energy Star rated - Yes
Loudspeaker Voltage - 70V
Loudspeaker Voltage - 100V
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 41 F
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
100V Taps: 120 Watt
70V Taps: 120 Watt
Impedance: 24000 ohm
Mount Type: Freestanding/1U 19-inch rack-mountable
Number of Channels: 2
Rack Units (Height): 1
Signal to Noise Ratio: 103 dB
Total Harmonic Distortion + Noise (THD+N): 0.10 %
Standby Power: 1 Watt
Depth: 14.59 in
Height: 1.70 in
Width: 17.28 in
Product Weight: 15.10 lbs
Color: Black
Input Signal Type: Balanced or unbalanced analog line-level
Output Signal Types: 4/8 Ohm, 70 Volt, 100 Volt
Output Power: 420 W (at 8 Ohms bridged)
Damping Factor: >100
Frequency Response: 20Hz to 20kHz (±0.5 dB at 4/8 Ohms)
Crosstalk: >70 dB (at 1kHz)
Main Power: 100 to 240 VAC (50/60 Hz)
Humidity: 10 to 90 % (RH, non-condensing)
Heat Dissipation: 110 BTU/hr (at 8 Ohms, all channels driven at 1/8th output power)
Chassis: Metal with black finish, vented top and sides, convection cooled
Front Panel: Metal, black finish with polycarbonate label overlay
Energy Star rated: Yes
AC Voltage: 100 Volts