8 Channel Shallow-mount High-power Network DSP Matrix Amplifier

Model: THE DIRECTOR® M4840

Network DHCP Signal Matrix Amplifier With Volume Control
8 Channels x 100 Watts at 8 Ohms (All Channels Driven)
8 Channels x 200 Watts at 4 Ohms (All Channels Driven)
Bridgeable to 400 Watts of Bridged Power
Digital Signal Processing (DSP) Performance

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Director® Model M4840 is a compact, shallow-mount (2U / 11.75”D), eight-channel matrixing amplifier with DSP processing; including EQ, delay, crossover, volume, and built-in speaker profiles, all controllable via network commands. This high performance amplifier delivers an impressive 100 watts per channel, stable into 4 ohms. With four analog stereo and four digital inputs, the M4840 can easily operate as a high performance multi-channel amplifier and amplified audio matrix.

Network DHCP Signal Matrix Amplifier With Volume Control
8 Channels x 100 Watts at 8 Ohms (All Channels Driven)
8 Channels x 200 Watts at 4 Ohms (All Channels Driven)
Bridgeable to 400 Watts of Bridged Power
Digital Signal Processing (DSP) Performance
Built-In Speaker Optimization Profiles
Ethernet Port for Status Monitoring, Source Switching and 12 Volt Trigger Control
Built in Matrix Delivering Analog or Digital Inputs to be Routed To Any Zone or Digital Bus Output
Network Programmable Graphic & Parametric Equalization with User Memories
Assignable Names for All Zones & Amplifier
Digital Signal Sense
Programmable Electronic Crossover for Local Subwoofer Applications; Subsonic Filter
AudioControl LightDrive Anti-Clipping Speaker Protection
Digital and Analog Inputs with Digital and Analog Pass Thru / Loop Outputs
Dual Digital Audio Bus Outputs
Shallow-Mount 2U Rack Space – only 11.75? deep (Includes Rack Mount Brackets)
Home and Commercial Installations
Includes:
The Director Model M4840, Speaker Connectors, Remote Connector, Power Cord, Manual, Warranty

Amplifier Type - Power Amplifier
Rackmountable - Yes
Warranty - Yes
Spec Sheet available - Yes

Impedance: 8 ohm
Number of Channels: 8
Number of Inputs: 8
Number of Outputs: 10
Number of Watts Per Channel: 100 Watt
Power Handling: 400 Watt
Rack Units (Height): 2
Signal to Noise Ratio: 95 dB
Depth: 11.75 in
Height: 3.50 in
Width: 17 in
Product Weight: 16.50 lbs
Warranty (Length/Type): 5 Years

Amplifier 4148584 kb - Data Sheet

Project List

Suggested Products

2-Channel Dante Amplifier

by AVPro Edge

2x500W 70/100V/8ohm Digital Amp w/2 Inputs

by Vanco International

8-Channel Power Amplifier, 150W/Ch., 4/8 Ohm or 100V, International, 220-240V

by Crestron Electronics, Inc.